Operation
DEACTIVATING THE ALARM
1)Press the SET button twice to enter the alarm mode.
2)Press the T/F button once. The time indication disappears from the Vacuum Flourescent Display(VFD) and a series of dashes will appear ( :
3)Press the POWER button. The alarm is now deactivated.
NOTE : The set times will be stored in memory and can be reactivated whenever desired by performing steps 1) - 3) of the DEACTIVATING THE ALARM procedure.
SETTING THE ALARM TONES
1)Press the SET button twice (power off).
2)Press the TEL button once to hear the alarm tone.
NOTE : Alarm must be in the “Activated” mode to hear tones.
3)Pressing Preset button 1, 2, or 3 will select a different tone.
4)Press the POWER button to select this tone.
5)When the alarm sounds, press the POWER button to turn it off.
- 14 -