IMPORTANT
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or naviga- tion. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function then the vehicle is in ‘park’ or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied, must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle.
A. Precaution:
1.Before installation, verify that it will not damage electrical wires, fuel lines, brake lines, hoses, exhaust systemcomponents or any other items that will impair the operation of the vehicle.
2.Ensure the cable has already been pulled through the supporting pipe before installing the base into the headrest. Ensure there is no foreign material trapped inside the enclosure before installing the monitor into the base.
3.Tighten all screws/bolts/nuts securely for installation.
4.To avoid electrical hazards, do not disassemble the cabinet of the monitor.
5.Use only the supplied DIN cable. Disconnect the cable from the signal source before disconnecting it from the monitor, after turning off the whole system.
6.Do not use gasoline, thinners or other thinning liquids to clean the unit. Remove dust and stains with a damp cloth.
3
3 of 12