10)Lay the flaps of the headrest ma- terial down into the recess and in- sert the Mounting Tray into the re- cess. Check for fit. If it does not fit properly, you may need to re- move some more foam.
NOTE: The Mounting Tray will need to be secured to the headrest, either by using tie straps, screws, etc...
11)Guide the cable through the side opening of the Mounting Tray and plug it into the Monitor. Make sure the connector locks into place. In- sert the Monitor into the Mount- ing Tray and secure the cable using tie wraps or screws
12)Turn the Monitor around and in- sert it into the Mounting Tray housing. Snap into place.
13)Connect the Monitor power input plug to a DC power source (Red plug +12 VDC, Yellow plug +12 VDC Constant and Black plug
14)Connect the external video source output signal (from VCP/ DVD, TV Etc.) to the VIDEO IN jack. Test the system to verify proper installation.
7
128-6544
7 of 12