Audiovox VOH683 owner manual Controls and Indicators, Battery Installation, Headphone Operation

Controls and Indicators (Fig.1)

1.INFRARED PICKUP SENSORS – (Receives signals from transmitter)

2.BATTERY COVER

3.VOLUME CONTROL

4.POWER SWITCH

5.POWER INDICATOR LED

6.CHANNEL A/B SWITCH

7.AUTO ON/OFF MICRO SWITCH

Fig. 1

R

L1

6

2

5

3

4

Auto ON/OFF Micro Switch is activated when headphones are placed on head (shown below)

7

Battery Installation (Fig.2)

1.Place two alkaline AAA batteries in the Headphone’s battery compartment making sure that the battery polarity is correct.

2.Replace the battery cover.

Fig. 2

HEADPHONE OPERATION

IMPORTANT: To prevent possible ear damage, Read the following Carefully!

1.Turn the headphone volume down off before turning on the power. Turn on the headphone power then increase the headphone volume to a comfortable level.

2.Before switching between channels A and B, remove headphones and turn the volume down because signal of the other channel could be louder.

-12-

128-6115

12 of 16