Remote Controlled Monitor Functions
1.POWER ON/OFF
Press this button to turn the VOH683 On. The channel number or current video source will be displayed on screen and the picture will appear in a few seconds. Press the button again to turn the VOH683 Off.
2.VOLUME UP/DOWN BUTTONS
Use these buttons to increase or decrease the volume level of the headphone jacks or external speaker if installed. They are also used to make picture adjustments in picture select mode.
Note: These buttons will not affect the volume of wireless headphones or a wired RF modulator. When using these devices the volume must be adjusted with the wireless headphone volume control or with your radio’s volume control (see page 13, Headphones and Wired FM Modulator).
3.PICTURE SELECT BUTTON
Each time this button is pressed, the on screen picture adjustment display cycles through “adjustment bars” for CONTRAST, BRIGHTNESS, COLOR and TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the
setting. The adjustment bar will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed.
4.VCP TV/VIDEO BUTTON
Press this button to control the functions on VCP with tuner.
5.POD TV/AV BUTTON
Any video equipment connected to the AUDIO/ VIDEO inputs can be viewed on the monitor by pressing this button. Each time the button is pressed, the Audio / Video source will change in the following sequence VIDEO 1, and VIDEO 2 .
Remote Controlled Radio Functions
6. FM RADIO POWER ON/OFF
Press this button to turn the FM Radio On. The radio station frequency will be displayed on LCD display window. Press the button again to turn the FM Radio Off.
7.MUTE BUTTON (FOR FM RADIO)
Press this button to shut off the sound at the headphone station for the FM radio audio only. Pressing the button again restores sound to the previously set level.
128-6115
7 of 16