16.REPLAY BUTTON
Pressing this button will rewind tape and immediately begin playback when the tape is fully rewound.
17.STOP BUTTON
Press this button to stop the tape.
FM Radio Operation
1.If using wired headphones, insert the headphone set plug into the headphone jack on the right side of the LCD pod labelled RADIO EAR. If using wireless headset, switch the Channel A/B switch to channel B for the FM radio. Channel A is used for video audio.
2.Press the RADIO POWER button. The LCD window will display the FM station frequency and memory channel number.
3.Press the tuning UP or DOWN button to select the desired radio station.
4.If the radio station is broadcasting in stereo, then LCD window will display STEREO.
5.Press the Memory button and select the preset number you wish to assign. The number can be selected from 1 to 6 sequentially. The selected number will flash. Press and hold the memory button until the display stops flashing. The preset will be stored after 2 seconds. The number will then be displayed continuously.
The desired frequency is now in memory. The unit can store 6 radio station frequencies in memory. The user can change or overwrite the radio station frequencies using the above procedure.
6.Pressing the Recall button will scroll through the six presets.
7.Pressing the Volume UP or DOWN button in the remote control unit will set the desired volume level in the headphones.
8.Press the Mute button on the remote control unit to mute the sound in headphone and press Mute button again to restore the sound to the original level.
128-6115
9 of 16