II.INSTALLATION OF CONSOLE
11.Raise console (item 6 pg 2) into approximate position against headliner. Connect O.E. wiring to A/C control.
12.Insert plastic flange on rear of console into opening in headliner. Make sure console is centered left to right. See Figure 9.
13.Secure console secure front of console using (2) two
FIGURE 9
14.Release video screen from locked position. Lower video screen to viewing position for access to mounting locations in top of video system housing.
15.Raise video system into approximate position and connect all wiring to components. Connect wiring and cabling to video system per instructions included with video system.
16.Check function of all components and lights. See operating instructions for video system operations check. For further assistance, refer to the video system manual for the technical support phone number listed for your area.
FIGURE 10
17.Insert video system into opening in console. Note: Make sure wires do not get pinched between video
system and console. Align holes in housing with holes in mounting bracket. Secure using (4) four
Caution: Do not overtighten screws.
18. Raise video screen into locked position.
6