Asus VN248 Series manual Assembling the monitor base, Connect cables

Page 8

1.3Assembling the monitor base

1.Attach the base to the arm.

2.Beware to align the latch to the notch on the base.

3.The end of the arm will slightly protrude from the base. No need to push it in.

4.Screw the base to the arm tightly.

3

2	1
	1
	4

• We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

1.4Connect cables

Connect the cables you need based on chapter 1.5.2, page 1-5.

• Flip upward the IO port cover to connect cables. After connected cables, replace the cover and carefully push it upward to its original position with both thumbs at both sides of the cover.

1-2	Chapter 1: Product Introduction

Image 8

Contents VN248 Series LCD Monitor User Guide Table of contents Federal Communications Commission Statement Safety information Care & Cleaning Where to find more information Asus websites Optional documentationPackage contents WelcomeConnect the cables you need based on .5.2, Assembling the monitor baseConnect cables Monitor introduction Front of the LCD monitorStatus Description Rear of the LCD monitor Letter QuickFit FunctionDetaching the arm/stand for Vesa wall mount Adjusting the monitor How to reconfigure OSD On-Screen Display menuOSD Function Introduction SplendidColor Select the image color you like from this functionImage System Setup Adjusts the system configurationSpecifications ModelTroubleshooting FAQ Possible SolutionHdmi 1.3 CEA-861 Formats Supported Timing Supported Timing ListVesa / IBM Modes Support Timing