Elo TouchSystems touch monitor manual

Page 29

Should you wish to construct your own custom power cable, Elo highly recommends using AMP "Mate-N-Lock" part number 350766-1 and male type contacts, AMP part number 350547-1.

After connecting the power cable to the monitor, but before applying power, ensure that the power cable’s black or brown wire connects to the monitor’s brown wire; the power cable’s green wire connects to the monitor’s green wire; and the power cable’s white or blue wire connects to the monitor’s blue wire.

Note: The cable used must include a green (earth ground) wire, it must be 18AWG (or larger), and it should be rated SVT 105C 600V (or better).

B-22E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e

Image 29
Contents Page Elo Entuitive Touchmonitor User Guide Page Copyright 2003 Elo TouchSystems Inc. All Rights Reserved Page Table of Contents Page About the Product PrecautionsRS-232 touch interface Unpacking Your Touchmonitor Installation and SetupConnect the Video Cable Connecting Your TouchmonitorConnect the Serial Touchscreen Cable Connect the Power Cable Installing the Driver Software Page Installing the Touch Driver for MS-DOS Windows Page Operation About Touchmonitor AdjustmentsTouchmonitor Controls Using the On Screen Display OSDOSD Adjustments Correct Position, V. Position TimeoutMoire RotationContrast DegaussBrightness 9300 Problem Suggestion s TroubleshootingProblem Suggestion s Touchscreens An Overview Touch TechnologyITouch Touchscreens Touchmonitor Safety Page Monitor Touchmonitor Specifications19Monitor EMC Environmental MechanicalOptical PIN Number Signal Signal Pinout for 15,17 and 19 MonitorsMonitor Mode Power ConsumptionPower Monitor Power ModeHorizontal Resolution Frequency Refresh Rate Preset Timing TableRegulatory Information E141667DHHS Warranty Page Index