Audio OUT Speaker setup, Down MIX | Eltax DR-110 specification

AUDIO OUT (Speaker setup)

There are two available items: They are AUDIO OUT and

DOWN MIX.

AUDIO OUT

You can choose to send the player’s audio signals to an external receiver using the following outputs:

ANALOG:

Audio signals are sent using inner amplifier. Selecting this choice will disable the digital audio outputs. SPDIF/RAW:

Set to this selection will output the raw bit stream signal of Dolby Digital or DTS from the optical jack. In order to enjoy Dolby® Digital DTS discs, this unit’s digital output jack must be connected to the digital-input jack of a Dolby® Digital or DTS compatible receiver or processor.

SPDIF/PCM:

PCM stands for Pulse Code Modulation and is digital audio. Connecting this unit to an amplifier with a built-in D/A converter can play the same digital audio format as on CDs.

- - AUDIO SETUP PAGE - -

DOWN MIX

LT/RT

A kind of Dolby Pro-Logic coding formats.

STEREO

Down mixed Stereo L/R audio output.

5.1 CH

Set to “5.1CH” setting items to enable the 5.1 channels.

- - AUDIO SETUP PAGE - -

	AUDIO OUT
	DOWNMIX	LT/RT
	FRONT	STEREO
	CENTER	5.1CH
	REAR
	SUBWOOFER
	CNTR DIST.
	REAR DIST.
	TEST TONE
SET DOWNMIX MODE

AUDIO OUT

DOWNMIX

FRONT

CENTER

REAR

SUBWOOFER

CNTR DIST.

REAR DIST.

TEST TONE

ANALOG

SPDIF/RAW

SPDIF/PCM

SELECT AUDIO OUTPUT

NOTES:

Do not play the Dolby Digital or DTS sound tracks on an audio component without having a built-in Dolby Digital or DTS decoder. Otherwise, when you play the Dolby Digital or DTS sound track, a loud noise will come out from the speakers, affecting your ears or causing the speakers to be damaged.

This player has a conversion function for converting Dolby® Digital into the LPCM format. This allows playback of CDs with the regular playback system without the need for a special converter.