Elo TouchSystems 2201L user manual SW601363 Rev B Page 20

Page 20

Explanation of Markings

(1). In accordance with the SJ/T11364-2006 requirement, the electronic information products are marked with the following pollution control logo. The Environment-Friendly Use Period for this product is 10 years. The product will not leak or mutate under normal operating conditions listed below, so that the use of this electronic information product will not result in any severe environmental pollution, any bodily injury, or damage to any assets.

Operating Temperature:0-40 / Humidity:20%-80% (non-condensing).

Storage Temperature:-20~60 / Humidity:10%~90% (non-condensing).

(2). It is encouraged and recommended that this product be recycled and reused according to local laws. The product should not be thrown away casually.

V. Power Adapter Specifications

Electrical Ratings:

Input: 100-240VAC, 50-60Hz

Output: 12VDC, minimum 3A, LPS

VI. Monitor Specifications

Electrical Ratings:

Input: 12VDC, 3A

Operating Conditions:

Temperature: 0°C - 40°C

Humidity: 20% to 80% (non-condensing)

Altitude: 0 to 3,048m

Storage Conditions:

Temperature: -20°C - 50°C

Humidity: 10% to 90% (non-condensing)

Altitude: 0 to 12,192m

User Manual – 2201L

SW601363 Rev B - Page 20 of 22

Image 20
Contents 2201L Touchmonitor Copyright 2011 Tyco Electronics. All Rights Reserved Table of Contents Product Description PrecautionsIntroduction Unpacking the Touchmonitor InstallationConnector Panel & Interfaces Touchmonitor Connections Installing the Touch Technology Software Drivers SW601363 Rev B Page 8 SW601363 Rev B Page 9 Mounting General Mounting InformationRear Vesa Mount Stand MountingPower OperationTouch VideoPhase On-Screen Display OSDOSD OSD and Power Lockouts AudioTechnical Assistance Solutions to Common ProblemsTechnical Support Care and Handling Safety & MaintenanceSafety Waste Electrical & Electronic Equipment Directive Weee Regulatory Information PBB SW601363 Rev B Page 20 Warranty Information Check out Elo’s Website