Settings

Navigation System

Edit

Touch Edit to see the list of all points used in the route. The ﬁrst item in the list is the departure point of the route without a valid GPS position, the last reached via point if you open the list during navigation, or the point where Cydle most recently recalcu- lated the route. This means the list is per- manently updated, and via points drop out during the journey. The last item in the list is your ﬁnal destination.

Use the arrows on the right to browse through the list and touch any line to high- light it. You can perform the following op- erations:

•Add: you can add a new route point (or a new ﬁnal destination if the highlighted item is the last one in the list) after the selected point. The Find menu opens automatically to let you search for an address, POI, coor- dinates, one of your favourite destinations, or select a point from the History list. As soon as you select any of these, Cydle re- turns to the Edit screen and your selection appears right under the highlighted line.

•Delete: you can delete the selected point from the list. If the highlighted item is the last one in the list, the previous via point will be promoted to be the ﬁnal destina- tion.

•Optimise: you can optimise the order in which you will drive through the via points, if there is no speciﬁc order you would like to keep. When tapping this button, Cydle reorders the list instantly to save you time and fuel. Optimisation is for via points only. Your starting point and destination remain in their positions, of course.

•Up and Down: using these buttons you can re-order the list by moving the high- lighted item up or down in the list.

Info

This button opens the Route Information screen described here:. This screen shows information about the current route and has a few additional options to check and

modify your active route.

Main button

The Main button at the bottom right corner leads to the Main menu screen.

Cydle provides several settings in order to let you customise the functions of the pro- gram. The Settings screen can be accessed directly from the Main menu screen.

General Settings

These are the basic settings of Cydle.

Safety Mode

Safety mode will disable the touch-screen above 10 km/h (6 mph) to keep your atten- tion on the road.

You are still able to use the hardware but- tons, but you cannot set a new destination or change the settings.

When you disable Safety Mode, Cydle will warn you.

Set Favorite Destinations

You can select two of your most frequent destinations to be your favourites. You can start navigating to either of them by only two taps on the screen. The original names of these points are Home and Work.

You can rename them and specify their locations. To determine the location you can use the same Find menu options as for a route destination, and depending on that choice and the information available, the location will be shown here as a street address, a latitude/longitude position, or