Carson SA-500-10 14V SA-500-10 Specifications Amplifier Input Power, Siren Mode Output Power

	SA-500-10 SPECIFICATIONS
AMPLIFIER INPUT POWER:	9-16 Volts DC, 8 Amps DC per 100W Speaker			(SA-500-10 14)
	18-32 Volts DC, 4 Amps DC per 100W Speaker			(SA-500-10 28)
SIREN MODE
OUTPUT POWER:	15 VDC input, 100W speaker(s)	(SA-500-10 14)
	30 VDC input, 100W speaker(s)	(SA-500-10 28)
	One speaker – 105 Watts RMS
AUDIO MODE	Two speakers - 180 Watts RMS
OUTPUT POWER:	14 VDC input, 100W speaker(s)	(SA-500-10 14)
	28 VDC input, 100W speaker(s)	(SA-500-10 28)
	One speaker – 40 Watts RMS
SIREN	Two speakers - 80 Watts RMS
FREQUENCY:	700Hz - 1450Hz Nominal
CYCLE RATES:	WAIL - 15 cycles/min
	YELP - 210 cycles/min
	PHASER - 15 cycle/sec
AUDIO	TWO-TONE – 1 cycle/min
RESPONSE:	200Hz - 10KHz +/-3db
	Harmonic Distortion Less than 3% @ 1KHz		(SA-500-10 14)
RADIO INPUT	Harmonic Distortion Less than 7% @ 1KHz		(SA-500-10 28)
SENSITIVITY:	0.75VAC Input Min. for 40 Watts RMS Output (1 spkr)
OPERATING
TEMPERATURE:	-15° F to +140° F
SIZE:	6-1/8" Wide X 2-3/4" High X 5-7/8" Deep
WEIGHT:	5 pounds
NIGHT VISIBILITY:	Backlit front control panel when power is on
PROTECTION:	High Voltage – Siren output stops with input voltage above highest rating
	Stops high output power from blowing speaker
	Reverse Polarity – Fuse(s) blows when power is wired backwards
	Shorted Output – Fuse(s) blows if speaker shorts (a common problem)

NOTICE

Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice.

Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.

TB0353A Page 2 of 8 09/27/05