TRENDnet TEW-510APB manual Wireless Wireless Security, Security Mode, WPA only

4.5 Wireless – Wireless Security

The Wireless Security settings configure the security of your wireless network. There are three wireless security mode options supported by the AP: WEP (Wired Equivalent Privacy), WPA Pre-Shared Key, WPA RADIUS.

Wireless Security

The security options are the same and independent for your Wireless-A and Wireless-G networks. You can use different wireless security methods for your networks; however, within each network (Wireless-A or Wireless-G), all devices must use the same security method and settings.

Security Mode:

WEP: WEP is a basic encryption method, select a level of WEP encryption, 40/64-bit,128-bit or 152-bit. If you want to use a Passphrase, then enter it in the Passphrase field and click the Generate button. If you want to enter the WEP key manually, then enter it in the WEP Key 1-4field(s). To indicate which WEP key to use, select the appropriate TX Key number.

WPA only:

WPA Pre-Shared Key: This security mode offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of encryption method you want to use, TKIP or AES. Enter the Passphrase, which can have 8 to 63 characters. Then enter the Key Renewal period, which instructs the AP how often it should change the encryption keys.

WPA RADIUS: This security mode must work with a RADIUS server using EAP –TLS or PEAP for user authentication.

To use WPA RADIUS, select the type of encryption method you want to use, TKIP or AES.

Enter the RADIUS server’s IP address and port number (default is 1812), along with the authentication shared key by the AP and the server.

Enter the Key Renewal period, which instructs the AP how often it should change the encryption keys.

Change these settings as described here and click the Apply button to apply your changes or click Cancel button to cancel your changes. For additional information, click Help.

User’s Guide 15