Operating Environment | Package Includes | ||
- | Operating Temperature: | - | USB Anywhere |
- Shipping and Storage Temperature: | - Power Supply (DC | ||
- | Operating Humidity: 30% - 85% | - | User manual |
- Altitude: 0 to 7000 feet |
|
| |
Getting Started
1.Install three AAA alkaline or rechargeable batteries (batteries not included) or plug in the AC power adapter. Please note: Some MP3 players will require additional power in which case the AC power adapter has to be plugged in.
2.Press the Power button to turn the USB Anywhere on.
Copying all data files from the source device: Full Mode
1.To copy ALL files from the source device to the target device, move the Full/Root switch in the “Full” position.
2.Connect your source device. The source LED will pulse with a green light until the device is recognized. Once the device is recognised, the LED will then light up with a solid green light. If the source LED turns red, the attached device is not a suitable source device.
3.Before connecting your target device, make sure the target device has sufficient unused memory space for the files you are about to transfer. It is possible for the source device to have a higher storage capacity than the target device. However, the files that are to be transferred must not exceed the unused memory space on the target device.
4.Connect your target device. The target LED will pulse with a green light until the device is recognized. Once the device is recognised, the LED will then light up with a solid green light. If the target LED turns red, the attached device is not a suitable target device or does not have enough memory space available for the files you are about to transfer.
5.Press the Copy button to transfer data from the source device to the target device. The source and target LED will start pulsing for the duration of the data transfer.
6.Once the data transfer is complete, the source and target LED will stop pulsing and the LED in the shape of a checkmark (✓) will light up green.
24/8/0524/8/05 9:39:039:39:03 amam