Optimising radio reception

RADIO OPERATION

Note:

If no station is found with the chosen program type, a beep is sounded, and the display brief- ly shows “NO PTY”. The tuner returns to the most recently received station.

Storing the program type on the station button

➮Select a program type with the or button, 7.

➮In order to save a program type, hold down one of the softkeys, 4, indicating “ST1” to “ST6”, for more than one sec- ond.

The program type is saved at the chosen lo- cation.

Setting the PTY language

You can select the language in which program types are displayed.

➮Press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “PTY LANG” to ap- pear in the display.

➮Press the or button, 7, in order to switch between the languages “DEUT- SCH”, “ENGLISH” or “FRANCAIS”.

➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.

Treble cut in the presence of interference (HICUT)

The HICUT function improves the sound when radio reception is poor.

When interference is being received, the treb- le is automatically cut, which therefore also reduces the level of interference.

Adjusting HICUT

➮Press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “HICUT” to appear in the display.

➮Press the or buttons, 7, in order to adjust the HICUT.

“NO HICUT” means that the function is inac- tive, while “HICUT 3” indicates the strongest automatic reduction of the treble and the in- terference.

➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

Bandwidth selection in the presence of interference (SHARX)

The SHARX function provides you with the facility of eliminating interference from neigh- bouring stations as far as possible. Switch on the SHARX function when stations are crowd- ed.

Switching SHARX on and off

➮Press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “SHARX” to appear in the display.

➮Press the or buttons, 7, in order to switch SHARX on or off.

“NO SHARX” means that the function is not active, while “SHARX ON” means that the bandwidth selection is operating automatical- ly.

➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.