CASSETTE OPERATION
Fast rewind
➮Press the
button, 7. “REWIND” appears in the display.
Stopping the tape
➮Press the OK button, 5, or the tape run button, 7, on the other side.
Play continues.
Note:
While the tape is being fast wound, it is pos- sible to hear the radio station that was most recently tuned in. This requires the “Radio monitor” function to be switched on.
Switching the radio monitor on and off
➮Press the softkey, 4, indicating “RM”.
When the radio monitor is switched on, “RM” is displayed with light and shade reversed. The current state, i.e. “RM ON” or “RM OFF”, is shown briefly on the display when switch- ing.
Skipping blank tape
It is possible automatically to skip sections of blank tape that are more than ten seconds long. This requires the blank skip function to be activated.
Switching blank skip on and off
➮Press the softkey, 4, indicating “BLS”.
When the blank skipping is switched on, “BLS” is displayed with light and shade reversed. The current state, i.e. “BLS ON” or “BLS OFF”, is shown briefly on the display when switch- ing.
Selecting chrome/metal tape
There is a facility for setting the type of tape in the inserted cassette. We recommend that you always set the type of the inserted tape in order to obtain the best replay quality.
➮Press the MENU button, 8.
➮Press the 
or 
button, 7, until “CC TAPE” appears in the display.
➮Adjust the tape time with the
and
buttons, 7.
For chrome and metal tape select the setting “MTL ON”, and select “MTL OFF” for Fe tape.
➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.
Dolby* B noise suppression
You should switch on the Dolby function when- ever you are playing tapes recorded with the aid of the Dolby B process.
➮Press the softkey, 4, indicating “
”.
When the Dolby function is switched on, “
” is displayed with light and shade reversed.
*Noise suppression system manufactured under licence from Dolby Laboratories. The word Dolby and the
Traffic information with cassette operation
The “TA” function, which gives priority to traf- fic announcements, enables your radio to re- ceive traffic announcements even when play- ing cassette tapes. When a traffic announce- ment comes, the cassette play is stopped and the traffic announcement is played. For more information, read the section on “Traffic Infor- mation”.
48