Blaupunkt MINNESOTADJ30, BOSTONC30 Tuning into radio stations, Adjusting seek tuning sensitivity

Selecting the MW or LW memory levels

➮To switch between the MW and LW memory levels, press M•L 6(not available for the Augsburg C30 and the Minnesota DJ30).

Tuning into radio stations

You can tune into radio stations in a number of different ways.

Automatic seek tuning

Press or >.

The radio will tune into the next availa- ble station within reception range.

Manual station selection

You can also tune into radio stations manually.

Press or>.

Note:

You cannot use manual tuning unless the RDS function and the PTY function are deactivated.

Paging through the broadcasting network (for FM only)

If a radio broadcasting network has more than one station, you can page through the “station network”.

➮Press or > to tune into the next station in the network.

Note:

To take advantage of this function, you must have activated the RDS functions and deactivated the PTY function.

It is only possible to tune into those sta- tions which have been received once

RADIO OPERATION

before already. To do this, start the TravelStore function.

signals only, or to those with weaker reception signals as well.

➮ Press MENU ?.

“MENU” will appear in the display.

➮ Press or >repeatedly until “SENS” appears in the display.

The currently selected setting will ap- pear next to “SENS”. “SENS HI6” indi- cates the highest level of sensitivity, “SENS LO1” the lowest. If you select “SENS LO”, lo will light up in the dis- play.

➮Press > to select the desired sensitivity.

➮Once you have made your selec- tion, press MENU ?.

Storing radio stations

Storing radio stations manually

➮Select the desired memory bank FM1, FM2, FMT or either MW or LW (MW and LW are not available for the Augsburg C30 and the Min- nesota DJ30).

➮Tune the radio into the desired sta- tion.

➮Press and hold down one of the station preset buttons 1 to 5 @ on which you want to store the radio station for longer than two sec- onds.