Volume control

SWITCHING ON/OFF

Switching the car audio system on/ off by pressing 4

➮Press 4to switch the car audio system on.

➮Press 4for longer than two sec- onds to switch the car audio sys- tem off again.

The system will then switch off.

Switching the car audio system on by inserting a cassette tape

If the system is switched off and there is no cassette in the tape deck,

➮insert a cassette into the tape deck with the open side facing towards the right until you hear it click into place. Do not use force.

The audio system will switch on. Tape playback will begin.

Volume control

The car audio system volume can be adjusted to levels from 0 (off) to 66 (max- imum).

➮To increase the volume, turn the volume control knob 3 to the right.

➮To decrease the volume, turn the volume control knob 3 to the left.

Adjusting the power-on volume

It is possible to adjust the volume at which the car audio system switches on.

➮Press MENU ?.

“MENU” will appear in the display.

➮Press or >repeatedly until “ON VOL” appears in the display.

➮Press > to adjust the vol- ume.

If you adjust this setting to “0”, the car audio system will switch on at the vol- ume used before it was switched off.

Warning of serious injury

If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on.

If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears!

➮Once you have selected the de- sired settings, press MENU ? twice.