THEFT PROTECTION | SWITCHING ON/OFF |
Activating/deactivating the LED code
To visibly indicate that the Augsburg C30 and the Minnesota DJ30 are equipped with theft protection, you can activate the code LED. The code LED will flash in key 4when the car audio system is switched off.
➮Press MENU ?.
“MENU” will appear in the display.
➮Press 
or 
>repeatedly until “LED” appears in the display. “OFF” or “ON” will appear next to LED in the display.
➮To switch the LED on or off, press 
or
>.
➮Once you have completed your settings, press MENU ?.
Switching the car audio system on/off
The car audio system can be switched on/off in a number of ways.
Switching the car audio system on/ off with the ignition
If the car audio system has been con- nected to your vehicle ignition, it is pos- sible to switch it on and off with the igni- tion.
You can also switch the car audio sys- tem on when the ignition is switched off.
➮Press down and hold 4until the car audio system switches on.
Note:
To prevent the car battery from running down, the radio will switch off again au- tomatically after one hour.
Switching the car audio system on/ off with the removable front panel (for the Boston C30, Dublin C30, Montreux C30 and Ontario DJ30 only)
➮Remove the release panel.
The car audio system will switch off.
➮Replace the release panel.
ENGLISH
The car audio system will switch on again.The last settings used (radio, tape deck or CD changer) will be activated.
29