Blaupunkt CD50 operating instructions Radio Operation, Radio operation

Page 11

RADIO OPERATION

Radio operation

Switching to the radio mode

If you are currently using the CD player or CD changer,

press CD•C @repeatedly until “RADIO” appears in the display.

RDS function

This car audio system has been equipped with an RDS radio receiver. Many FM radio stations now transmit a signal which contains such other infor- mation as the station name along with their regular programming. As soon as the radio station name is detected, it will appear in the display. The RDS func- tion can be switched on or off.

Switching the RDS function on/off

To take advantage of the RDS function, press RDS 4.

When the RDS function has been acti- vated, the RDS symbol will light up in the display.

Selecting the waveband/ memory bank

The car audio system is able to receive FM and AM radio programs. There are three memory banks for the FM wave- band and one memory bank for the AM waveband.

Up to six radio stations can be stored on each of the memory banks.

To switch between the FM memory banks, press FM / TS 5.

To select the AM waveband, press AM ?.

Tuning into radio stations

You can tune into radio stations in a number of different ways.

Automatic seek tuning

Press or :.

The radio will tune into the next availa- ble station within reception range.

Manual station selection

You can also tune into radio stations manually.

Press or :.

Note:

You cannot use manual tuning unless the RDS function is deactivated.

Paging through the broadcasting network (for FM only)

If a radio broadcasting network has more than one station, you can page through the “station network”.

Press or :to tune into the next station in the network.

Note:

To take advantage of this function, you must have activated the RDS function.

It is only possible to tune into those sta- tions which have been received once before already.To do this, use the SCAN or TravelStore function.

Adjusting seek tuning sensitivity

It is possible to adjust the sensitivity of the seek tuning function to tune the ra- dio into stations with strong reception signals only, or to those with weaker reception signals as well.

ENGLISH

11

Image 11
Contents Casablanca CD50 Open here Ouvrir s.v.p Por favor, abrir Favor abrir Page Operating Elements Contents Important information Important InformationRemoving the operating panel Removable Front PanelRemovable front panel Theft protection systemSchwitching ON/OFF Switching the car audio system on/offMute Volume ControlVolume control Adjusting the power-on volumeAdjusting the volume of the beep Speed-dependent volume adjustmentRadio operation Radio OperationScanning the radio stations within reception range Scan Storing radio stationsStoring radio stations automatically TravelStore Recalling stored radio stationsSelecting the display of variable text Adjusting the scan timeOptimising radio reception Starting CD player operation Adjusting the tunerCD player operation CD Player Operation Removing the CD Switching the display modeNaming CDs Selecting CDs CD Changer OperationCD changer operation Starting CD changer operationScanning all of the tracks on all of the CDs Scan Displaying the clock briefly Setting the timeClock Selecting the 12/24-hour time display modeTone and BALANCE/FADER Adjusting the tone and balance/faderSwitching Loudness on/off Equalizer Switching the equalizer on/offAdjusting the equalizer EqualizerAdjusting the spectrometer Selecting a sound presetSelecting a car preset Whattodo Assistance in setting your equaliserExternal audio sources External Audio Sources SpecificationsSpecifications Blaupunkt-Werke GmbH Casablanca CD50 Normas de seguridad GB Safety instructionsConsignes de sécurité Blaupunkt Instruções de segurança12V Equalizer Amplifier RemoteCD-Changer Control 100
Related manuals
Manual 29 pages 9.89 Kb