Blaupunkt CD50 Equalizer, Switching the equalizer on/off, Adjusting the equalizer

EQUALIZER

Equalizer

This car audio system is equipped with a parametric digital equalizer. In this case, parametric means that it is possi- ble to individually raise or lower one fre- quency (GAIN +10 to -20 dB) for each of the five filters.

The following filters are available:

●	SUB LOW EQ	32 to	50 Hz
●	LOW EQ	63 to	250 Hz
●	MID EQ	315 to 1250 Hz
●	MID/HIGH EQ	1600 to		6300 Hz
●	HIGH EQ	8000 to		12500 Hz

These filters can be adjusted without the use of measuring equipment. As a re- sult, it is possible to significantly influ- ence the in-vehicle acoustics.

Notes on making equalizer settings

We recommend that you use a CD you are familiar with to make the settings.

Before you set the equaliser, set bass, treble, balance and fader to “0” and de- activate the Loudness function. For more information on how to do this, re- fer to the section on “Tone and balance/ fader”.

➮Now listen to the CD you have se- lected.

➮Evaluate the sound according to your own personal preferences.

➮Now refer to “Sound impression” in the following table.

➮Make the settings for the equalizer as described under “What to do”.

Switching the equalizer on/off

➮To switch the equalizer on, press and hold down DEQ <until EQ lights up in the display and “EQ ON” appears briefly.

➮To switch the equalizer off, press and hold down DEQ <until EQ no longer lights up in the display and “EQ OFF” appears briefly.

Adjusting the equalizer

➮Press DEQ <.

➮Press or :to select “DIGITAL EQ”.

➮Press or :to select the filter.

➮Press or :.

➮To select the frequency, press

:.

➮To adjust the level, press or

:.

➮To select the next filter, first press OK ;and then or :.

➮Once you have completed making

all of the necessary adjustments, press DEQ <.

22