External Audio Sources Specifications

EXTERNAL AUDIO SOURCES

SPECIFICATIONS

External audio sources

In addition to the CD changer it is also possible to connect another external au- dio source to the line output. These sources can include a portable CD play- er, MiniDisc player or MP3 player.

If you have not connected a CD chang- er, it is possible to connect two external audio sources.

You must activate the AUX output in the menu.

If you would like to connect another ex- ternal audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized Blau- punkt dealer.

Specifications

Amplifier

Output power: 4 x 25 watts RMS

	acc. to DIN 45 324
	at 14.4 V
	4 x 40 watts max.
	power
Tuner
Wavebands:
FM:	87.5 - 107.9 MHz
AM:	530 - 1710 kHz

FM Mono sensitivity: 7.8 dBf

ENGLISH

Switching the AUX output on/off

➮Press MENU 8.

“MENU” will appear in the display.

➮Press :repeatedly until “AUX- IN-1 OFF” or “AUX-IN-1 ON” ap- pears in the display.

In place of the “1”, there is a “2” for the second AUX input.If you have connect- ed a CD changer, then only AUX “2” can be selected.

➮Press or :to switch AUX on or off.

➮Once you have completed your selections, press MENU 8or OK ;.

Note:

If the AUX input has been switched ON, you can select it by pressing CD•C @.

FM frequency response:

30 - 15000 Hz

CD player

Signal-to-noise ratio: 96 dB

Frequency response:

20 - 20000 Hz

Preamp Out

4 channels:

4 V

Subject to technical modification!