Switching on and OFF, Switching On and Off | Blaupunkt CD31 specification

SWITCHING ON AND OFF

Switching On and Off

The device can be switched on and off in the following ways:

Switching On and Off with the Vehicle Ignition

If the device is correctly connected to the vehicle ignition, and has not been switched off with button >, it is switched on and off along with the ignition.

You can also switch the device on when the ignition is off:

➮Press button >.

Note:

●To protect the vehicle battery, the device is automatically switched off after an hour if the vehicle ignition is off.

Switching On and Off with the release panel

➮Remove the release panel. The device switches off.

➮Replace the release panel.

The device switches on. The most re- cent settings (radio, CD, CD-changer or AUX) are restored (no AUX on Dakota CD31).

Switching on and off with button >

➮Press button > to switch on.

➮To switch off, hold button > pressed for longer than two sec- onds.

The device switches off.

Switching on by means of CD insertion

If there is no CD in the device when it is switched off:

➮Gently insert a CD printed-side-up into the slot, until you feel it stop.

The CD is then automatically drawn into the device.

While the CD is being drawn in, do not push or pull it.

The device switches on.The CD begins playing.