Blaupunkt CD31 operating instructions Radio Operation

RADIO OPERATION

Radio Operation

Switching on Radio Operation

If the current operating mode is CD, CD- changer or AUX (only for Santa Fe CD31)

➮Press the BAND button 2.

or

➮Press the CD•C button 7 until “RADIO” appears in the display.

Select Waveband/Memory Level

This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) stations.Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands. Five stations can be stored in each memory level.

Selecting FM Memory Level

To switch between the FM memory lev- els FM1, FM2 and FMT

➮press the BAND button 2.

Selecting AM waveband

To select the AM waveband

➮press the BAND button 2until “AM” appears in the display.

Setting the Station

There are a number of ways to set the station.

Automatic Station Search

➮Press the or button 9.

The next station that can be received is tuned in.

Adjusting Station Search

Sensitivity

You can choose whether to search only for stations with strong signals, or wheth- er weak stations should be included.

➮Press the MENU button :.

➮Press the or button 9until “SENS HI” or “SENS LO” appears in the display.

“SENS HI” means maximum sensitivi- ty, “SENS LO” means minimum sensi- tivity. When “SENS LO” is selected, the display shows “lo”.

➮Set the desired sensitivity with the

buttons 9.

➮When the setting procedure

is complete, press the MENU button :.

Manual Station Tuning

You can also tune to the station manu- ally.

➮Press the or button 9.

Saving a Station

Saving a Station Manually

➮Choose between memory levels FM1, FM2, FMT or the AM wave- band (MW/LW).

➮Tune to the station you want.

➮Choose one of the station buttons 1-5; on which you want to store the station, and hold it pressed for longer than one second.

10