RADIO MODE
Radio mode
Switching to radio mode
If you are in CD or CD changer mode (CD changer only with the Las Vegas CD32),
➮keep pressing the SOURCE 6 button until the radio mode appears in the display together with the memory bank and frequency.
Selecting the frequency band / memory bank
This unit can receive programs broad- cast over the FM and AM frequency band. There are three preset memory bank for the FM range and one for the AM range. Six stations can be stored on each memory bank.
Selecting the FM memory bank
To switch between the FM memory bank FM1, FM2 and FMT,
➮press the BAND/TS button :.
Selecting the AM waveband
To select the AM waveband,
➮keep pressing the BAND/TS button : until AM appears in the display.
Tuning into a station
There are various ways of tuning to a station.
Automatic seek tuning
➮Press the 
or 
button 5.
The unit tunes to the next receivable station.
Setting the sensitivity of station seek tuning
You can choose whether to tune only to strong reception stations or to also tune to those with a weak reception.
➮Press the MENU button 5.
➮Keep pressing the 
or 
button
5 until “SENS HI” or “SENS LO” appears in the display
“SENS HI” means that the tuner is set high to sensitivity. “SENS LO” means it is set to the low sensitivity setting. If “SENS LO” is selected, “LOC” lights up in the display.
➮Set the required sensitivity using the 
and 
buttons 5.
When you have finished making your changes,
➮press the MENU button 5.
Tuning into stations manually
You can also tune into stations manu- ally.
➮Press the 
or 
button 5.
Storing station presets
Storing stations manually
➮Select the required memory bank (FM1, FM2 or FMT) or the AM waveband.
➮Tune into the station.
➮Press one of the station buttons
10