Tuning into a station, Storing stations

➮ Press the preset station button of the station you want to listen to.

➮ Select the memory in which the station was stored.

Storing stations automatically (Travelstore)

You can automatically store the five sta- tions with the strongest reception in the region (only FM).

The stations are stored in the FMT memory.

Note:

Stations that were previously stored in this memory are deleted in the process.

➮ Keep the FMT button 1pressed for longer than two seconds or briefly press the TS button 5 (only on the Lübeck C30).

The automatic station storing procedure begins. “T-STORE” appears in the dis- play. After the process is completed, you will start hearing the station that is stored in FMT memory location 1.

RADIO MODE

Tuning into a station

Automatic station search mode

➮ Press either the or button :.

The unit tunes into the next receivable station.

Sensitivity of the station search mode

You can configure the radio to only re- ceive stations with a strong reception or to also receive those with a weak re- ception.

➮ Keep pressing the MENU button ; until “SENS” appears in the display.

The display shows the currently set value for sensitivity. “SENS HI” means that the tuner is highly sensitive. “SENS LO” means it has a low sensitivity set-

ting. If “SENS LO” is selected, “lo” lightsListening to preset stations up in the display.

➮ Set the required sensitivity with the

and buttons :.

➮ Press the MENU button ; until the radio display appears in the display.

Storing stations

Storing stations manually

➮Select the required memory: FM1, FM2 or FMT (only for FM).

➮Tune in the station.

➮Press one of the station buttons 1- 5 < for longer than one second to store the station on that button.