Blaupunkt KINGSTON DJ Scrolling through the broadcast- ing networks FM only, Storing stations

Page 12

Manual tuning with << >>

You can also tune into a station manually.

Requirement:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF·TAor PTY.

Manual tuning:

Press << >>; the frequency will change in short intervals in the downwards or upwards direction.

If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

Scrolling through the broadcast- ing networks (FM only)

You can use the << >> buttons to tune into stations in your reception area.

If it is possible to receive several pro- grammes in the same broadcasting network, you can scroll through them in the forwards direction by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, ...

For this to work properly you must have al- ready tuned into the stations at least once and “AF” must be active (lights up in the dis- play).

To do this, you can start the Travelstore seek operation:

Press BA/TS for 2 seconds; the sys- tem will start to run through the fre- quency band.

If “AF” is not lit up,

Hold AF·TAdown. A beep sounds and “AF” appears.

This fulfils the requirements for selecting stations with << >>.

Switching between the memory banks (FM)

You can switch between the memory banks 1, 2 and T in order to store stations and re- call them later.

The currently selected memory bank ap- pears in the display.

Press the BA/TS button as many times as necessary until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T).

On MW/LW, you can also store six stations each (Freiburg RCM 148, Kingston DJ with- out MW, LW).

Select the appropriate waveband by pressing BA/TS.

Tune in a station with the rocker switch (either automatically / or manually << >>).

Press the desired preset button until the radio resumes play after the mut- ing (takes approximately 2 seconds, confirmed by a beep).

Now the station has been stored.

The display will indicate which preset but- ton is currently activated.

Automatically storing the strongest stations with Travel- store

You can automatically store the six most powerful FM stations in your current recep- tion area sorted according to their signal strength. This function is particularly conven- ient on longer trips.

Press the BA/TS button for 2 seconds. “T-STORE” will appear in the display.

32

Image 12
Contents Radio / Cassette Page Display Display fieldContents Quick reference RELAUD F DSC-MODE E PTY SRC/SCAF·TA = BA/TSRPT MIXAUD What you need to know Installation Traffic safetySwitching AUD off Important notes Setting the clock Clock Release panel Theft protectionSelecting the audio mode Fixing the release panelStation tuning Automatic seek tuningAF Alternative frequency REG regional programmeSwitching between the memory banks FM Manual tuning withScrolling through the broadcast- ing networks FM only Storing stationsSelecting the automatic tuning sensitivity Recalling stored stationsScanning stations with Radio Scan Changing the scan timeSwitching PTY ON/OFF Culture Science Varied POP Music Rock Music ClassicsChecking the programme type of the station Displaying the selected programme typeSituation PTY is switched on and lights up in the dis- play Storing programme typesScanning stations with PTY Scan PTY priorityAutomatic seek tuning start Switching the warning beep offTraffic programme station reception with RDS-EON Traffic announcement priority on/offCassette deck operation CD changer operation Selecting a title Use this function to scan all of the CD tracksTo stop the Scan function DSC programming REGRegional function on/off Overview of the DSC factory settings ScantimeAUX DisplaySpecifications AppendixBlaupunkt-Werke GmbH Bosch Gruppe
Related manuals
Manual 23 pages 10.1 Kb