Adjusting the volume for traffic announcements and the warning beep
Although this volume was preset at the fac- tory, you can use the DSC function to alter the setting (see “DSC programming - TA VOL”).
Cassette deck operation
Cassette playback
Insert the tape into the slot with the open side showing to the right.
Press SRC/SC to select the tape deck mode. “TAPE 1” or “TAPE 2” will appear. The tape will be played in the direction previously selected.
Cassette eject
Press 
to eject the cassette.
Fast winding
Press the FF or FR button to fast forward
(FF)or fast rewind (FR) the tape during cas- sette operation: “FORWARD” or “REWIND” lights up in the display.
When the end of the tape is reached with fast winding, the tape direction will change and the other side of the tape will be played. With “Radio Monitor ON” during fast wind- ing you can listen to the radio programme previously selected. It is possible to change the Radio Monitor setting in the DSC mode. (Refer to “DSC programming - RM”).
Reversing the tape
To change the tape direction during cassette playback:
•Press FR/FF simultaneously.
The display shows “TAPE 1” or “TAPE 2” for the selected tape side.
Traffic information during cassette playback
The Traffic Announcement function (priori- ty for traffic programmes) makes it possible to receive traffic information during cassette playback. If a traffic message is broadcast, cassette playback will stop and the message reproduced.
This function is active, if “TA” lights up in the display.
•Press the AF·TAbutton briefly to acti- vate TA.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
37