Clock
This car radio is equipped with a
Display priority:
To switch the display priority, press the 
button until you hear a beep. Press as many times until the desired display mode is ac- tive (not during radio reception).
Radio mode
Press the 
button briefly to display the clock.
Cassette mode
Press this button to switch the display be- tween the cassette direction and clock indi- cation.
Changer mode
Press the 
button briefly to switch the dis- play between the CD number, playback time and clock indication.
Setting the clock
•Press DSC briefly.
•Press 
/
to selection the “CLOCK- SET” function.
•Press << >> to set the hours or min- utes. The adjustable option will flash in the display.
•Press 
/
to adjust the flashing value.
•After you have set the clock, press DSC briefly to store the new setting.
Release panel
Theft protection
This unit is equipped with a detachable con- trol panel. A car radio without control panel is worthless for thieves.
Protect your car radio and detach the con- trol panel when you leave your car. It is very easy to attach and detach the release pan- el thanks to its specific design.
Note:
Do not pull the release panel straight out from the chassis, but detach it as illustrated below. Be sure not to drop the panel.
Do not expose the release panel to direct sunlight or other heat sources.
Do not leave it in a humid place.
Detaching the release panel
Press the REL button to release the control panel. Then pull it off gently as illustrated.
If the set was still in operation, it will turn off now. All current settings remain stored. If a cassette is inserted, it will be kept in the set. The radio will turn on automatically when you attach the release panel again.
Attaching the release panel
Slide the panel (B) from the left to the guide of the chassis (A). Gently push the left side of the panel against the front of the chassis until it snaps into place.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
29