Traffic Memo TIM, Setting the clock in the DSC

Traffic Memo (TIM)

This set is equipped with a digital speech	Setting the clock in the DSC
memory, making it possible to automatically	menu
record up to four traffic messages lasting a	TIM needs the exact time in order to opera-
maximum of four minutes.
	te precisely. Note that the clock also has to
When the radio is switched on and “TP” dis-
played, the system will record all incoming	be reset after any interruption of the power
	supply (flashing time display).
messages of the tuned in station.
	• Press DSC and the time will be dis-
If the priority for traffic announcements is
		played.
activated (“TA” shown on the display panel),

the set will also record the messages broad-	• Press << to set the hours or >> to set
cast by the traffic station of the programme		the minutes.
network (see also “Receiving traffic pro- The value to be set is flashing.
gramme stations with RDS-EON”).	To alter the value,
Depending on the length of the new messa-
	•	press the rocker switch / .
ge, the oldest messages are automatically
	Once having completed the setting,
deleted.
	•	press or DSC.
If a message is longer than four minutes,

“OVERFLOW” will be displayed after four	Now the clock setting has been stored.
minutes of playback, followed by a beep tone	If you have pressed the button, you can
indicating that the system was unable to	immediately go on working in the DSC
record the message in full.	menu.

If four traffic messages have been recorded,			DEUTSCH
T4 always represents the most recent bulle-

tin which will also be played back first.
			ENGLISH
If the traffic memory is still empty, “NO TIM”
will appear on the display panel.
If the display shows four dashes, the clock
has not been reset after the last interruption

of the power supply.			FRANÇAIS
Use the rocker switch / to play back any
of the messages T1 to T4.
To repeat a message:



•	Press	once.	ITALIANO
To select one of the older messages (e.g.
to skip from T4 to T3):
•	Press	as many times as required.

			NEDERLANDS
To select one of the more recent messages
(e.g. to skip from T2 to T3):
•	Press	twice.
When keeping the left or right part of the

rocker switch << >> depressed, the mes-			SVENSKA
sage text including its recording time will be

Warning note

Danger of damaging the antenna in a car wash

If you have installed a motor antenna, then please read the corresponding warning note at the end of this chapter.

•Press TIM briefly.

For example, the display shows “NDR 2” (station name or frequency), followed by “T4 14.30” (T4 = 4th traffic message re- corded at 2:30 p.m.).

played back quickly in forwards or back-
wards direction.
Press TIM to switch off the function.	ESPAÑOL
	ESPAÑOL
	PORTUGUÊS