THEFT PROTECTION | SWITCHING ON AND OFF |
Display Radio Passport Data
Using the supplied KeyCard you can show the Radio Passport data such as the device name, type number (7 6 ...) and the device number in the display.
➮Press the MENU button, 8.
➮Press the 
or 
button, 7, until “LEARN KC” appears in the display.
➮Press the
button, 7.
The Radio Passport data is shown on the dis- play as moving text.
To leave the menu
➮Press the OK button, 5, or the MENU button, 8, to leave the menu. The set- tings are then saved.
Care of the KeyCard
The KeyCard can only function properly if the contacts are free from foreign particles. Avoid touching the contacts with your skin.
If necessary, clean the KeyCard contacts us- ing a
Switching on and off
There are a number of methods for switching the device on or off.
Switching on and off with the button 2
➮Press the main button, 2, to switch on. The device switches on.
➮To switch off, hold the main button, 2, pressed for longer than two seconds.
The device switches off.
Switching on and off with the vehicle ignition
If the device is correctly connected to the ve- hicle ignition, and has not been switched off with the main button, 2, it is switched on and off along with the ignition.
You can also switch the device on when the ignition is off.
➮Press the main button, 2.
Note:
In order to protect the vehicle battery, the device is automatically switched off after an hour if the vehicle ignition is off.
Switching on and off with the KeyCard
You can also switch the device on and off by inserting and removing the KeyCard, if the device was not previously switched off with the main button, 2. Read the chapter on “KeyCard theft protection” for information about inserting and removing the KeyCard.
38