Blaupunkt Pasadena CD71 installation instructions Adjusting the volume, Volume

Page 10

VOLUME

Adjusting the volume

Muting

The volume can be adjusted in steps from 0 (off) to 66 (maximum).

To increase the volume, turn the volume control to the right.

To reduce the volume, turn the volume control to the left.

Adjusting the switch-on volume

The volume level of the device when it is switched on can be adjusted.

Press the MENU button, 8.

Press the button, 7, as often as is necessary for “ON VOL” to appear in the display.

Adjust the switch-on volume with the

buttons, 7, or with the volume control.

If you set a volume level below “1”, “LAST VOL” will appear in the display. This means that whatever volume was in use before the device was switched off will be activated again when the device is switched on.

Risk of serious injury!

If the level of switch-on volume is set to maximum, the volume when switching on can be very high.

If the volume was set to maximum before switching off, and the value for the switch-on volume is set to “LAST VOL”, the volume when switching on can be very high.

Either case can result in serious injury to hearing!

You can reduce the level of the volume (mute) suddenly.

Press the main button, 2. “MUTE” is shown on the display.

Cancelling the mute

Press the main button, 2.

or

Turn the volume control, 3.

Muting during telephone operation

If your car radio is connected to a mobile tel- ephone, the radio is muted when the tele- phone is taken “off the hook”. This requires the mobile telephone to be connected to the car radio as described in the fitting instruc- tions.

If, in the course of a telephone call, a traffic announcement is made, and if traffic an- nouncements have been given priority, the traffic announcement will be played. For more information, read the section on “Traffic Infor- mation”.

Adjusting the volume for the confirmation tone (beep)

With certain functions, if you hold a button pressed for longer than two seconds, for in- stance in order to save a station frequency to a station button, a confirmation tone, or beep, is generated. The volume level of the beep can be adjusted.

Press the MENU button, 8.

Press the button, 7, as often as is necessary for “BEEP” to appear in the display.

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

Press the OK button, 5, or the MENU button, 8, to leave the menu. The set- tings are then saved.

Adjust the volume with the buttons, 7, or with the volume control. “0” means that the beep is off, while “9” is the maximum beep volume.

Press the OK button, 5, or the MENU button, 8, to leave the menu. The set- tings are then saved.

39

Image 10
Contents Pasadena CD71 Page 14 13 Operating Elements Contents Fitting Road safetyAccessories International telephone informationInserting the KeyCard KeyCard theft protectionTheft Protection Removing the KeyCardTraining a new KeyCard / entering the master code KeyCard lost or damagedVisual theft protection LED Switching on and off Theft Protection Switching on and OFFAdjusting the volume VolumeTone and volume Tone and VolumeAdjusting the display brightness Adjusting the displayAdjusting the viewing angle DisplayRadio Operation Setting Up the TunerSwitching on radio operation Radio operationAdjusting the sensitivity of the station search Setting the stationSelecting the frequency range / memory Saving a station automatically Travelstore Going to a preset stationSaving a station Scanning through stationsAdjusting the sample duration Scantime Program type PTYOptimising radio reception Traffic Information only Europe tuner modeRadio Operationtraffic Information Traffic Information Adjusting the volume for traffic announcementsCD operation Starting CD operation and inserting the CDCD Operation Traffic announcements with CD operation Programming favourite CD tracksNaming CDs CD changer operation optional CD Changer OperationSampling all tracks on all CDs Scan Release the OK button 5. The CD name has been deleted Clock Time Setting the timeCD Changer Operation Time Switching the equalizer on and off Selecting 12/24-hour clock modeAdjustment instructions EqualizerSelecting the tone preset Adjusting the equalizerAdjusting the sharpness of the filter Adjusting the level indicatorEqualizer adjustment guide Tone impression/problem ActionTMC for dynamic navigation systems Switching the AUX input on and offExternal audio sources External Audio Sources TMCPre-amplifier / subout Technical dataPRE-AMPLIFIER / Subout Guarantee GuaranteeBlaupunkt GmbH Radio operation Setting Up the Tuner in the operating Pasadena CD71 Important notice for customers USA / LatinMode Radio Réglage du syntoniseur Pasadena CD71622 402 Recepção do rádio Regular o sintonizador