Radio mode
Browsing through broadcasting networks (FM only)
If a radio station provides several pro- grammes, you have the option of browsing through its
Note:
The convenient RDS function must be activated before you can use this fea- ture.
Press the 
or 
button :to change to the next station of the broadcasting network.
Note:
When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.
When you have finished making your chang- es,
press the MENU button 9.
Note:
You can set different sensitivity levels for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).
Tune into the desired station.
Press and hold down one of the station buttons 1 - 6 for longer than two sec- onds to assign the station to that but- ton.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into those with a weak reception.
Press the MENU button 9.
Press the 
or 
button :repeatedly until "SENS" appears on the display.
The display shows the currently set sensitiv- ity level. "SENS HI3" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitiv- ity setting.
Set the desired sensitivity level using the 
or 
button :.
Storing stations automatically (Travelstore)
You can automatically store the six stations offering the strongest reception in the re- gion (FM only). The stations are stored in the FMT memory bank.
Note:
Any stations that were previously stored in this memory bank are deleted in the process.
Press and hold down the BND•TS but- ton 6for longer than two seconds.
The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the sta- tion that is stored in memory location 1 of the FMT memory bank.
42