Radio mode | Traffic information |
|
|
Optimising radio reception
Treble reduction feature during interference (High Cut)
The High Cut function results in an improved reception in case of weak radio reception (FM only). If reception interferences are present, the interference level is automati- cally reduced.
Switching High Cut on/off
Press the MENU button 9.
Press the or button :repeatedly until "HICUT" appears on the display.
Press the or button : to switch High Cut on (1) or off (0).
"HICUT 0" means no automatic reduction of the interference level, "HICUT 1" means au- tomatic reduction of the interference level.
Press the MENU button 9.
Configuring the display
In radio mode, you have the option of dis- playing the waveband with memory bank and the time or station name or frequency of the current station.
To switch the display, press and hold down the DISPL button 8for long- er than two seconds.
Traffic information
Your device is equipped with an
Once the traffic report has been played, the system will switch back to the programme that you were listening to before.
Switching traffic information priority on/off
Press the TRA•RDS button 7.
The priority for traffic announcements is ac- tivated if the display shows the traffic jam symbol.
Notes:
You will hear a warning beep
•if you leave the reception area of a traffic information station that you are currently listening to.
•if you leave the reception area of a traffic information station that the system is tuned into while listening to a CD or a CD in the changer, and the subsequent automatic search cannot find a new traffic information station.
•if you retune the radio from a traffic information station to a station that does not broadcast traffic informa- tion.
If you hear the warning beep, you can ei- ther switch off traffic information priority or tune into a station that broadcasts traffic information.
ENGLISH
45