CD mode
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button ;.
"RPT TRCK" appears briefly on the display and the RPT symbol is displayed. The track is repeated continuously until you deacti- vate RPT.
Cancelling repeat
If you want to cancel the repeat function,
press the 4 RPT button ;again.
"RPT OFF" appears briefly on the display and the RPT symbol disappears. Normal playback is then resumed.
Interrupting playback (PAUSE)
Press the 3 button ;. "PAUSE" appears on the display.
Cancelling pause
During the pause, press the button 3 ;.
Playback is continued.
Configuring the display
You can select from two display types for CD mode:
•Track number and time
•Track number and playing time
To switch the display, press and hold down the DISPL button 8for long- er than two seconds.
Traffic announcements in CD mode
If you wish to receive traffic announcements in CD mode,
press the TRA•RDS button 7.
The priority for traffic announcements is ac- tivated if the display shows the traffic jam symbol. For further details, please read the chapter entitled "Traffic information".
Ejecting a CD
Press the button 2.
The control panel opens out towards you.
Press the eject button <next to the CD tray.
The CD is ejected.
Remove the CD and close the control panel.
Notes:
•If a CD is ejected, the drive will auto- matically draw it back in again after 10 seconds.
•You can also eject CDs whilst the de- vice is switched off or whilst another audio source is activated.
48