Blaupunkt RDM 168, RDM 169 Recalling stored stations, Scanning stations with Radio Scan

•Tune into a station with the rocker switch (either automatically or manual- ly).

•Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds) or un- til you hear a beep.

Now the station has been stored.

The display will indicate which station has been stored.

Note:

If you attempt to store a station which is al- ready stored, the corresponding station and the station preset will flash in the display if you are in a different memory bank.

Storing stations with the stron- gest reception automatically with Travelstore

You can automatically store the six FM sta- tions with the most powerful signals in your current reception area sorted according to their signal strength. This function is parti- cularly convenient on longer trips.

•Press the “BA/TS” button for 2 seconds. “T-STORE” will appear in the display.

The six strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). When this process has been

completed, the name of the strongest stati- on will appear in the display and begin to play.

If desired, stations can also be stored ma- nually in the Travelstore bank, refer to the section on “Storing stations”.

Recalling stored stations

You can recall any stored station at the touch of a button.

•Select the waveband by pressing BA/ TS. For FM, also choose the corre- sponding memory bank by pressing the BA/TS button as many times as necessary until the desired bank ap- pears in the display.

•Press the corresponding preset button briefly to recall the station.

Scanning stations with Radio Scan

You can scan through all of the stations in your reception area.

To start the Scan function:

•Press “SC” for approximately 2 secon- ds.

The scanned frequency or the station name will start flashing in the display.

During the scanning process “FM-SCAN” or

“AM-SCAN” will light up in the display.	DEUTSCH
If you want to continue listening to the stati-
	ENGLISH
on which is being scanned, then
• Press “SC” briefly.
This ends the Radio Scan function.
If no station is selected, the scan function
will switch off after the frequency band has	FRANÇAIS
run through. The station selected previous-
ly will resume play.
Changing the scan time
	ITALIANO
to between 5 and 20 seconds.
The scan time per radio station can be set
For more detailed information, refer to the
	NEDERLANDS
section on “DSC programming - SCANTI-
ME”.
Selecting the automatic tuning
sensitivity
	SVENSKA
vity.
You can alter the automatic tuning sensiti-
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).	ESPAÑOL
If “lo” does not light up, the radio will also
pick up weaker, more distant stations.
To switch the automatic tuning sensitivity
and program the sensitivity level, refer to the	PORTUGUÊS
section on “DSC programming “.

43