Selecting a waveband, Station tuning | Blaupunkt RDM 169, RDM 168

•

It is now possible to select stations using << >>.

Switching between the memory banks (FM)

You can switch between the memory banks I, II and T in order to store stations and re- call them later.

The currently selected memory bank will appear in the display.

Selecting a waveband

The following wavebands are available:

Press the “BA/TS”button to select the desi- red waveband.

•Press /; the car radio will automati- cally search for the next station.

If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.

You can also tune into a station manually. Important: AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these function by pressing “AF.TA” or “PTY”.

Manual tuning:

•Press << >>; the frequency will change in short intervals in the corresponding direction.

If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

To do this, you can start the Travelstore seek operation:

•Press “BA/TS”for 2 seconds; the sy- stem will start to run through the fre- quency band.

If “AF” is not lit up,

•Press “AF.TA” until you hear a beep.

Automatic seek tuning

Down

<</>> Up/down in short intervals

(on FM only if “AF” is switched off)

Press the “BA/TS”button as many

	You can use the << >> buttons to tune into	times as necessary until the desired
	stations in your reception area.
		memory bank lights up in the display.
	If it is possible to receive several program-

	mes in the same broadcast network, you can	Storing stations
	scroll through them in the forwards direc-	On FM, you can store six stations on the
	tion by pressing >>, or backwards using the
		preset buttons 1 - 6 for each of the memory
	<< button, e.g. NDR 1, 2, 3, 4, N-JOY, ...
		banks (I, II, T).
	For this to work properly you must have al-
		On MW/LW, you can also store six stations
	ready tuned into the stations at least once
	and “AF” must be active (lights up in the dis- each.
	play).	• Select the appropriate waveband by
		pressing BA/TS.