Important information |
|
What you need to know!
Before starting to use your new car radio you should carefully read through the information on “Traffic safety” and
Do not connect the loudspeaker outputs to ground!
Only use the accessory and replacement parts approved by Blaupunkt.
The car radio comes standard with the code system deactivated.
If the
Traffic safety
Traffic safety has always priority. Use your car radio in such a manner that you are always able to cope with and react to the prevailing traffic situation at any given time. Remember, even at 50 km/h you are still moving at a speed of 14 m per seconds.
It is also very important that you are able to hear, and react to, acoustic warning signals around you, for example from the police or the firebrigade.
Therefore, adjust the volume reasonably.
Installation/connection
The code system can only be switched on and off, if the radio is connected to perma- nent power.
If you like to install your new car radio by yourself or add other audio components to the existing ones, then please read carefully the enclosed instructions on installation and connection.
used again after the appropriate code num- ber has been entered (see car radio pass- port).
Wrong code number entered
It should not be possible for thieves to ascer- tain the code number by
This waiting time is 10 seconds after the first three attempts, and 1 hour following subse- quent attempts.
After 19 unsuccessful attempts, “OFF” will appear in the display and the set can no longer be restarted.
Note:
Keep you car radio passport with the code number in a safe place in order to avoid “unauthorized access” to your car radio.
20