Assistance in setting your equalizer
Start to make your settings in the
Frequency range | Sound impression/problem | What to do | Notes |
|
|
|
|
Bass | Bass reproduction too weak | Boost the basses with the | Avoid distortion. Boost the |
30 - 100 Hz |
| “LOW EQ” filter | level carefully if the speaker |
|
| Frequency: 50 to 100 Hz | diameter is too small |
|
| Level: +4 to +6 dB |
|
|
|
|
|
Lower | Unclear bass | Reduce the lower | The tone may become too |
100 - 400 Hz | Playback reverberates | with the “LOW EQ” filter | lean and aggressive. |
| Unpleasant pressure on the | Frequency: 125 to 400 Hz | Pay attention to the under- |
| ears | Level: approximately | lying tone of the music. |
|
|
|
|
| Sound appears to be in the | Reduce the | Playback should not be too |
400 - 4.000 Hz | foreground, very aggressive, | “HIGH EQ” filter | quiet. |
| no stereo effect | Frequency: 1000 to 2500 Hz | Tone too powerless |
|
| Level: |
|
|
|
|
|
Treble | Lifeless reproduction | Boost treble range with | Avoid a piercing type of tone |
4.000 - 20.000 Hz | Lack of transparency | “HIGH EQ” filter | Strong hissing sound un- |
| Instruments do not sparkle | Frequency: approximately | pleasant |
|
| 10 kHz |
|
|
| Level: +2 to +4 dB |
|
|
|
|
|
54