KeyCard theft protection system
Make sure that the unit is switched off; the operating panel is unlocked; the KeyCard has been removed; “LED ON” has been se- lected in the DSC mode (default setting).
If necessary, please refer to the section on “DSC programming - KC (KeyCard) LED”.
Switching off the flashing light
The flashing light can be switched off by selecting “LED OFF” in the DSC menu.
Lost or damaged KeyCard
If the KeyCard for your unit is lost or dam- aged you can train a new KeyCard.
You can purchase the new KeyCard from any authorised dealer. You will also require the master code for the unit, which you will find in the radio pass.
Always keep the radio pass in a safe place. Do not leave it in your vehicle.
•Press ENT after you have entered the correct master code.
The new KeyCard has been accepted when the unit will begin to play.
Care of your KeyCard
To ensure that the KeyCard will function properly it is important that the contacts are free from any foreign particles. Avoid direct skin contact.
If necessary, clean the KeyCard contacts using a cotton swab soaked in rubbing al- cohol.
Training the new KeyCard
•Insert the new KeyCard into the unit and lock the operating panel into posi- tion.
•Switch the unit off.
•Press TU and ST1 at the same time and switch the unit on. “0000” will ap- pear in the display.
•Now use the rocker switch to enter the
/
- Enter digits
(press as often as required) << >> - Select the entry position.
PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
63