Blaupunkt RDM 169 operating instructions KC KeyCard, Scan Scantime, Read, Tom

Page 42

DSC programming

DLAY (Delay)

If an amplifier has been connected to the system, this setting can prevent the annoy- ing power-on pop noise. Use the delay func- tion to switch on the amplifier with a slight delay.

“Delay 1” = 250 ms to “Delay 9” = 2.25 sec. delayed power-on.

VOL (Volume)

Select the power-on volume.

Use / to adjust the desired volume lev- el. If you use << to select “Last VOL”, the system will come on at the volume selected before it was switched off.

SCAN (SCANTIME)

Set the scan time for the Scan and Preset scan functions from 5 to 30 seconds. This setting is valid for the radio or CD scan.

HP-F (High pass function)

The proportion of low frequencies can be reduced. It is advisable to take advantage of this function when you have connected a subwoofer.

Use / to select filters 1-5.

Use << to switch the high pass function off.

KC (KeyCard)

Use this menu to make adjustments to the KeyCard settings.

READ

To read out the KeyCard data.

The card supplied with the radio is used to display the model name, type number (7 6..) and the serial number.

With the extra card it is possible to display data entered by your specialised dealer. (See the section on “Short Additional Mem- ory S.A.M.”).

If you remove the KeyCard during the read- ing process, “Insert” will appear on the dis- play panel.

LRN (Learn)

To “train” a second KeyCard.

Please read the information in the section on “KeyCard theft protection system” - “Training a second KeyCard”.

LED (Light Emitting Diode)

When the audio system is switched off and the KeyCard has been removed, you can have the ON knob and an LED in the CD slot flash as additional theft protection.

The flashing light is not visible unless the operating panel is open.

LED off << >> LED on.

Refer to the information in the section on “KeyCard theft protection system” - “Flash- ing light as theft protection”.

TOM

If you have a second KeyCard with a Turn- On Message, you can switch off this infor- mation with “TOM off”. The default setting is “TOM on”.

TOM off << >> TOM on.

For more information refer to “ KeyCard theft protection system” - “Turn on Message (T.O.M.)”.

88

Page 41 Page 43
Image 42
Page 41 Page 43
Contents London RDM 10 9 8 Contents Contents Quick Reference Quick Reference Next FMNext AM MW, LW PRE Menu level Adjusting the radio functionsSwitch to ExitRT Radio text PTYREG Regional MonoCLR NameAUD DOT field DISDisplay = CDCVisual theft protection ? TU tuner@ CD slot KeyCard theft protection systemRC 08 remote control unit Option Important notes Removing the KeyCard KeyCard theft protection systemOperating the unit for the first time Incorrect KeyCardShort Additional Memory S.A.M KeyCard theft protection systemDisplaying the radio pass data Turn On Message T.O.MCare of your KeyCard Switching off the flashing lightLost or damaged KeyCard Training the new KeyCardClosing the Install menu First-time installationActivating the Install menu Setting the clockSwitching the ignition connec- tion on/off First-time installationReset to default settings Switching the internal output stage on/offSelecting the operating Optimising the viewing Mode Angle Switching between the menu levels Radio operation with RDS Radio Data SystemAF Alternative frequency Radio operation with RDS Radio Data System Station tuningAutomatic tuning REG regional programScrolling through the broadcast- ing networks FM only Changing the memory bank FMStoring stations Recalling stored stations Scanning stored stations with Preset ScanTo start Preset Scan MW, LW AMScanning stations with Radio Scan Switching from stereo to monoSelecting the seek tuning sensi- tivity Changing the scan time ScanProgram type Switching PTY on/offPTY Program Type NewsSelecting stored program types PTY seek tuningSelecting and storing PTY program types To select any program typeSwitching radio text off Radio textActivating radio text Traffic information station reception with RDS-EON Automatic seek tuning startSwitching the warning beep off Traffic announcement priority on/offTraffic Memo TIM Switching TIM on/offPower antenna might be dam- aged in a car wash Recording traffic messagesTraffic Memo TIM Temporarily interrupting the TIM standby modeAn automatic power antenna might be damaged in a car wash Retrieving stored traffic messagesCD operation / CD changer operation Repeating tracks/CDs CD operation / CD changer operationSelecting tracks Selecting CDsStoring tracks with TPM Switching TPM playback on/offTo alter MIX setting Deleting the TPMEntering CD names Deleting CD names/TPM at the same timeTo stop the Scan function Displaying the clock Selecting a 12 or 24-hour modeClock Time SynchronisationSetting the equaliser Setting the equaliser Switching the equaliser on/offSetting recommendations on the Internet Lower mid-range Assistance in setting your equaliserFrequency range Sound impression/problem What to do Bass Mid-range soundDSC programming TUN TunerDSC programming Disp DisplayVAR Various Read KC KeyCardScan Scantime TOMSync CLK ClockSET ModeOverview of the DSC default settings CDC ChangerTuner Specifications Glossary Technical TerminologyAmplifier CD playerGlossary Technical Terminology REGSoftkey Software key Index RDS-EONTPM Service numbers USABosch Gruppe
Related manuals
Manual 30 pages 14.63 Kb Manual 30 pages 11.18 Kb Manual 45 pages 36.37 Kb

RDM 169 specifications

Blaupunkt RDM 169 is a sophisticated car stereo system designed to deliver exceptional audio quality while providing a range of modern features to enhance your driving experience. Known for its reliable performance, this model has become a favored choice among car audio enthusiasts.

One of the standout features of the Blaupunkt RDM 169 is its support for MP3 and WMA playback. This versatility allows users to enjoy their favorite music in various formats, making it easy to access a vast library of tracks. With a built-in CD player, the device provides the classic option of listening to physical media, ensuring that your entertainment needs are met whether you’re using CDs, USB drives, or digital files.

The device features a sleek design with an easy-to-read display, providing essential information such as track titles and radio station frequencies at a glance. The user interface is intuitive, allowing for seamless navigation through playlists and radio stations. Additionally, the ergonomic buttons enhance usability, enabling drivers to adjust settings without distraction.

The Blaupunkt RDM 169 boasts a powerful built-in amplifier, delivering a robust output that enhances audio clarity and depth. With adjustable equalizer settings, users can customize their sound preferences to create an audio experience tailored to their liking. The system also includes preamp outputs, allowing for the easy addition of external amplifiers or subwoofers, further elevating the sound quality.

In terms of connectivity, the RDM 169 features a front USB port, accommodating a range of devices, including flash drives and smartphones. This ensures convenient access to your playlist without the hassle of tangled cords. Moreover, the auxiliary input allows for direct connections with various portable media devices.

For radio enthusiasts, the RDM 169 offers AM/FM capabilities with a built-in RDS tuner, providing access to a plethora of radio stations while displaying additional information such as song titles or artist names. The advanced tuning technology ensures reliable reception, even in areas with poor signal strength.

The Blaupunkt RDM 169 is compatible with steering wheel controls, offering greater convenience and safety as drivers can manage their audio settings without taking their hands off the wheel.

Overall, the Blaupunkt RDM 169 stands out in the automotive audio market due to its combination of remarkable sound quality, user-friendly design, and an array of modern features. Whether you’re a casual listener or a serious audiophile, this car stereo system is engineered to enhance your driving experience with exceptional entertainment and ease of use.
Top Page Image Contents