Blaupunkt RCR 87, RCR 27 operating instructions Recalling stored stations Loudness

• Press the corresponding preset button briefly to recall the station.

Switching between stereo and mono

Each time the radio is switched on, stereo playback is activated automatically.

The unit will gradually switch to mono if re- ception is poor.

You can also switch between mono and ste- reo reception manually:

Note:

Should you tune in a station which has al- ready been stored before, then the corre- sponding preset position and memory bank will briefly flash in the display.

Automatically storing the stron- gest stations with Travelstore

You can automatically store the five most powerful FM stations of your current recep- tion area sorted according to their signal strength. This function is particularly conve- nient on longer trips.

•Press the BND/TS button for 1 sec. “T-STORE” will appear in the display.

The five strongest FM stations will be auto- matically stored on the memory bank “T” (Travelstore). After this process has been completed, the radio will play the first stati- on stored on preset 1.

If desired, stations can also be stored ma- nually on the Travelstore bank (see “Storing stations”).

Recalling stored stations	Loudness
You can recall any stored station at the touch	If the system is played at a low volume le-
of a button.	vel, the Loudness function creates a more

•Select the memory bank with BND/TS. natural sound by boosting the low frequen-

cy range.

To turn Loudness on/off:

• Press AUD for about 1 second.

“LD” appears in the dislay, if the Loudness function is activated.

•Press the lo.m / button for approxi- mately 1 sec.

The selected condition will briefly appear in the display.

22