Adjusting the volume for traffic messages
This volume was preset at the factory, thou- gh you can alter the value.
To alter the volume of traffic messages:
•In radio or cassette mode, press the + / - button and adjust the volume you wish to have for traffic messages.
•Press TA/AF for about 3 seconds until “TA VOL” appears briefly in the dis- play.
Traffic messages will be played at a higher volume than the normal audio playback, if the priority for traffic messages has been activated before.
If the volume level is altered while a messa- ge is played, this will only affect the current announcement.
Tape operation
The car radio has to be switched on.
The unit will automatically switch to tape operation when a tape is inserted.
Inserting a tape
•Turn on the set.
•Insert a tape.
Side A or 1 will be played.
During tape operation, “TR 1” or “TR 2” (track) will be indicated on the display pa- nel.
Insert the tape with side A or 1 facing up, the open side showing to the right.
Removing a tape
•Press 
.
The cassette will be ejected.
Fast winding
Fast forward
•Press FF (fast forward).
When the end of the tape is reached, the mechanism will reverse the tape and start playing the other side.
Stop fast forward
•Press FR
Fast rewind
•Press FR (fast rewind).
When the beginning of the tape is reached, the mechanism will start playback.
Stop fast rewind
•Press FF.
Fast winding
FR: Fast rewind; press FF to stop
FF:Fast forward; press FR to stop
Reversing the tape
Press both buttons at a time.
“TR 1” or “TR 2” will appear in the display.
24