User Manual BDL4230ET
5.2.5.CONFIGURATION 1 MENU
|
|
| CONFIGURATION 1 |
|
|
|
|
| |
|
|
| AUTO ADJUST |
|
|
|
| POWER SAVE | ENGLISH |
|
|
| LANGUAGE | |
|
|
| PANEL SAVING |
|
|
|
|
| |
|
|
| COLOR SYSTEM | AUTO |
|
|
| CONFIGURATION RESET |
|
|
|
| FACTORY RESET |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sel |
|
|
|
|
| Adjust | Enter | Back | Quit |
|
|
| |||||||
|
|
| |||||||
|
|
|
|
| |||||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
AUTO ADJUST
Note: For VGA input only.
Use this function to automatically optimize the display of the VGA image. Press the SET button to adjust.
POWER SAVE
Set the display to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
•RGB - Select ON to let the display enter DPMS (Display Power Management Signaling) mode when no signal can be detected from the HDMI,
•VIDEO - Select ON to let the display enter power saving mode when no signal is detected from the VIDEO,
LANGUAGE
Select the language for the OSD menu.
Use the PLUS/MINUS button to select a language.
PANEL SAVING
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Press the SET/ PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
•BRIGHTNESS - Select ON and the brightness of the image will be reduced to an appropriate level, and the BRIGHTNESS setting in the PICTURE menu will become unavailable. Use the PLUS/MINUS button to make selection.
•PIXEL SHIFT - Select the time interval for the display to slightly expand the image size and shift the position of pixels in four directions (up, down, left, and right). Use the PLUS/MINUS button to make selection (OFF or
Note: PIXEL SHIFT will be set to 360 seconds when TOUCH FEATURE is turned on.
IMPORTANT: It is not recommended to keep a single static image displayed on your unit for long periods of time. This can cause image sticking, or ghost images, which will decrease the quality of your images. In some instances, ghost image damage can be permanent. To avoid such issues, we strongly recommend one of the following actions:
•Change the picture periodically
•Enable PIXEL SHIFT (See PIXEL SHIFT under Section 5.2.5.CONFIGURATION 1 MENU)
•Use a screen saver with changing images
COLOR SYSTEM
RETURN TO THE CONTENTS
