Appendix server specification, Processor | Fujitsu TX200 S6 manual

9 Appendix: server specification

This section explains the specifications for the server. The specifications for this server are liable to be updated without any notice. Please be forewarned.

System Board

System board type	D2799

Chipset	Intel 5500

Processor

Processor quantity and type

1or 2 Intel Xeon processors

Memory Modules Configuration

Memory slots	12

Memory slot type	DIMM (DDR3)

Memory capacity	2 GB - 96 GB
(min. - max.)

Memory protection	Advanced ECC; Memory Scrubbing; SDDC
	(Chipkill™); Hot-spare memory support
	Memory Mirroring support

Memory notes	max. 96 GB registered; min. 2 GB unbuffered;
	Memory Mirroring with 2 identical modules, Hot-
	spare Memory with three identical modules per
	channel

Interfaces

USB connectors	10 x USB 2.0 (3x front, 4x rear, 3x internal for backup
	devices plus 1x USB stick)

Graphics (15-pin)	1 x VGA

Serial 1 (9-pin)	1 x serial RS-232-C, usable for iRMC S2 or system
	or shared

TX200 S6

Operating Manual

115

Image 115

Fujitsu TX200 S6 manual Appendix server specification, Processor, Memory Modules Configuration, Interfaces

Contents

Primergy TX200 S6 Server Copyright and Trademarks Comments… Suggestions… Corrections…Certified documentation according to DIN EN ISO Aluminum electrolytic capacitors For your safetyHigh safety use Radio interference Harmonic Current Standards Measures against momentary voltage dropOnly for the Japanese market About Sata hard disk drives Only for the Japanese market Operating Manual Contents Control elements and indicators Contents Screen remains blank Appendix server specification 115 Index 121 Preface Documentation overview Concept and target groups for this manualPreface Preface Further sources of information Customer Self Service CSS Features Trusted Platform Module TPM Preface System boardSlots for expansion cards For up to eight 2.5-inch SAS/SATA hard disk drives Preface Hard disk drives SAS/SATA RAID controller Preface Onboard Sata controller Accessible drives Cooling Preface Power supply Preface High level of availability and data security Preface IRMC S2 with integrated management LAN connector Preface Server management Service and support Preface ServerView Installation Manager Preface ServerView Remote Management Notational conventions Electrical data Technical dataCompliance with regulations and standards Ventilation clearance Preface Mechanical specifications Floorstand RackWeight Maintenance area for the floorstand model TX200 S6 Installation steps, overview Installation steps, overview Important information Safety instructions Important information Before starting up Installation and operation Important information Important information Batteries TX200 S6 Never remove parts of the optical drive casing Laser information ESD label Important information Other important information Energy Star FCC Class a Compliance Statement CE conformity Transporting the server For the Japanese market, please refer to 安全上の注意およびその他の重要情報 Packaging information Environmental protectionEnvironmentally-friendly product design and development Energy-saving information Returns, recycling and disposal Labels on plastic casing parts Minimum acclimatization time Hardware installationHours Unpacking the server Hardware installation Vcaution Setting up the floorstand model Mounting the anti-tilt bracket Mounting the anti-tilt bracket Rack system requirements Installing/removing the rack modelFujitsu rack systems 3rd party racks For 19-inch standard rack for the Japanese market Mechanical requirements TX200 S6 Hardware installation Fitting the support bracket Hardware installation Fitting the support bracket Hardware installation Installing the support systems Insert the server see Inserting the server on Inserting the server a Hardware installation Inserting the server Installation in 3rd party racks Racks with installation depth smaller/greater than 735 mm Racks with installation depth of 735 mm Connector panel on the rear side Connecting devices to the server Hardware installation Connecting the monitor Connecting the server to the mains Connecting the server to the mains Using cable ties Using cable ties Disconnecting cables Connecting cables Hardware installation Access to the accessible drives Access to the drives floorstand modelStarting up and operation Removing the drive cover from the hard disk drive cover Starting up and operation Removing the hard disk cover Access to the HDD modules Front of server Control elements and indicators Control elements Starting up and operation ID card Starting up and operation LEDs on the control panel Indicators on the drives DVD drive activity indicator Indicators on the 3.5 inch and 2.5 inch HDD modules Starting up and operation Hard disk drive indicators Rear of server Starting up and operation LAN activity indicator shared LAN Starting up and operation LAN indicatorsLAN activity indicator management LAN LAN transfer rate indicator management LAN Indicators on the hot-plug power supply units Switching the server off Switching the server on and offSwitching the server on System already installed Power button override Timer-controlled switch-on/offRing indicator After power failure Configuring the onboard Sata controller Configuring the serverConfiguring the SAS/SATA RAID controller LSI RAID / Scsi Controllers Advantages of the ServerView Installation Manager Installing the operating system Configure onboard Sata controller Cleaning the server Property and data protection Bios Setup security functions Property and data protection Power supply overloaded Troubleshooting and tipsPower-on indicator remains unlit Power cable incorrectly connected Screen remains blank Server switches itself off No screen display or display drifts Flickering stripes on monitor screenMonitor does not support the set horizontal frequency RAID controller configuration incorrect Drives reported as dead when starting systemIncorrect date and time RAID controller is not configured for this drive Error message on screenAdded drive reported as defective Page CSS components CSS components Hot-plug power supply units optionalReplacing the hot-plug power supply unit Hot-plug components Hot-plug hard disk drives CSS components CSS components 2.1 3.5-inch HDD module and dummy module For description see section Hard disk drive indicators on CSS components 2.2 2.5-inch HDD module and dummy module CSS components Handling hard disk drives and HDD modules CSS components Floorstand removing the hard disk cover CSS components Removing/installing the dummy module Unlocking the 3.5-inch and 2.5-inch HDD modules Installing the 3.5-inch and 2.5-inch HDD modules CSS components Installing the HDD module CSS components Removing the HDD module Open the server see section Opening the server on Non-hot-plug components Opening the server example floorstand model Opening the server System fan 2 and system fan 2&4 CSS components Removing system fan 2 System fan 1 and system fan 1&3 Removing system fan 1 Example Removing system fan 1&3 Identifying a CSS component Replacing a memory module Installing a new memory moduleRemoving a defective memory module Replacing system fan 2 Replacing the system fanReplacing system fan 1 Removing a defective expansion card Replacing an expansion card Installing a new expansion card CSS components Installing a new expansion card Installing system fan 1 Reinstalling the fans and closing the server Installing system fan 2 CSS components Installing system fan 2 Closing the server example floorstand model CSS components Closing the server Interfaces Appendix server specificationMemory Modules Configuration Processor Onboard or integrated controllers Appendix server specification Drive bays PCI-SlotsOperating Panel Environmental Dimensions Base unit specific Electrical values 120 Operating Manual Index Bios Index Labels LAN activity indicator Sddc Unpacking, server USB connector