![](/images/new-backgrounds/1194834/19483463x1.webp)
Important information
Before starting up
VCAUTION!
●During installation and before operating the device, observe the instructions on environmental conditions for your device (see section "Technical data" on page 26).
●If the server has been moved from a cold environment, condensation may form both inside and on the outside of the machine.
Wait until the server has acclimatized to room temperature and is absolutely dry before starting it up. Material damage may be caused to the server if this requirement is not met.
●Only transport the server in the original packaging or in packaging that protects it from impacts and jolts.
Installation and operation
VCAUTION!
●This unit should not be operated in ambient temperatures above 35 °C.
●If the unit is integrated into an installation that draws power from an industrial power supply network with an IEC309 connector, the power supply's fuse protection must comply with the requirements for non- industrial power supply networks for type A connectors.
●The unit automatically adjusts itself to a mains voltage in a range of 100 V - 240 V. Ensure that the local mains voltage lies within these limits.
●This device must only be connected to properly grounded power outlets or insulated sockets of the rack's internal power supply with tested and approved power cords.
●Ensure that the device is connected to a properly grounded power outlet close to the device.
32 | Operating Manual | TX200 S6 |