CSS components
8.2.5.3Closing the server
Figure 38: Closing the server (example: floorstand model)
ÊPull the locking lever as far as it will go and insert the side cover in the five recesses (see small arrows) of the housing (1).
ÊPress the side cover against the housing and at the same time push the locking lever shut (2).
Closing the locking lever pushes the side cover forwards and the hooks on the upper edge of the side cover engage.
ÊIn the case of rack models, you still have to slide the server back into the rack (see section "Installing/removing the rack model" on page 49).
ÊConnect all power plugs to the power outlets.
ÊPress the On/Off button to start up the server.
114 | Operating Manual | TX200 S6 |
