CSS components
8.2.4.2Installing a new expansion card
Figure 35: Installing a new expansion card
ÊCarefully press the new expansion card into the slot until it clicks into place (1).
Make sure that the lug on the slot cover clicks into place in the corresponding hole.
ÊFit the clip onto the slot cover so that the pin fits into the hole.
ÊPush the clip under the metal nose until it clicks into place.
ÊSwing the lever (2) downwards into its locking position.
ÊIf necessary, connect the cables to the expansion card.
TX200 S6 | Operating Manual | 111 |
