Manuals / Fujitsu / Computer Equipment / Server

Fujitsu TX200 S6 manual Incorrect date and time, Drives reported as dead when starting system

Models: TX200 S6

1 126

Download 126 pages 61.66 Kb

Page 88

Troubleshooting and tips

7.6Incorrect date and time

ÊSet the date and time in the operating system or in the BIOS Setup under the Main menu, using System Date and System Time respectively.

INote that the operating system may affect the system time. For example, the operating system time may deviate from the system time under Linux, and would overwrite the system time in the default setting on shutdown.

If the date and time are still wrong after the server has been switched off and back on again, replace the lithium battery (for a description refer to the Technical Manual for the D2799 system board) or contact our customer service team.

7.7Drives reported as "dead" when starting system

RAID controller configuration incorrect

ÊCheck and correct the settings for the drives using the RAID controller utility. Further information is provided in the manual for the RAID controller.

88

Operating Manual

TX200 S6

Image 88

Fujitsu TX200 S6 manual Incorrect date and time, Drives reported as dead when starting system

Contents

Primergy TX200 S6 Server Copyright and Trademarks Comments… Suggestions… Corrections…Certified documentation according to DIN EN ISO For your safety High safety useRadio interference Aluminum electrolytic capacitors Harmonic Current Standards Measures against momentary voltage dropOnly for the Japanese market About Sata hard disk drives Only for the Japanese market Operating Manual Contents Contents Control elements and indicators Screen remains blank Appendix server specification 115 Index 121 Preface Documentation overview Concept and target groups for this manualPreface Preface Further sources of information Features Customer Self Service CSS Trusted Platform Module TPM Preface System boardSlots for expansion cards Preface Hard disk drives For up to eight 2.5-inch SAS/SATA hard disk drives Preface Onboard Sata controller SAS/SATA RAID controller Accessible drives Preface Power supply Cooling Preface High level of availability and data security Preface IRMC S2 with integrated management LAN connector Preface Server management Preface ServerView Installation Manager Service and support Preface ServerView Remote Management Notational conventions Electrical data Technical dataCompliance with regulations and standards Preface Mechanical specifications Floorstand Rack WeightMaintenance area for the floorstand model Ventilation clearance TX200 S6 Installation steps, overview Installation steps, overview Safety instructions Important information Installation and operation Important information Before starting up Important information Important information Batteries TX200 S6 Laser information Never remove parts of the optical drive casing ESD label Energy Star Important information Other important information CE conformity FCC Class a Compliance Statement Transporting the server For the Japanese market, please refer to 安全上の注意およびその他の重要情報 Environmental protection Environmentally-friendly product design and developmentEnergy-saving information Packaging information Labels on plastic casing parts Returns, recycling and disposal Minimum acclimatization time Hardware installationHours Hardware installation Unpacking the server Setting up the floorstand model Vcaution Mounting the anti-tilt bracket Mounting the anti-tilt bracket Rack system requirements Installing/removing the rack modelFujitsu rack systems For 19-inch standard rack for the Japanese market 3rd party racks Mechanical requirements TX200 S6 Hardware installation Hardware installation Fitting the support bracket Fitting the support bracket Hardware installation Installing the support systems Insert the server see Inserting the server on Hardware installation Inserting the server Inserting the server a Installation in 3rd party racks Racks with installation depth of 735 mm Racks with installation depth smaller/greater than 735 mm Connecting devices to the server Connector panel on the rear side Connecting the server to the mains Hardware installation Connecting the monitor Connecting the server to the mains Using cable ties Using cable ties Connecting cables Disconnecting cables Hardware installation Access to the accessible drives Access to the drives floorstand modelStarting up and operation Starting up and operation Removing the drive cover from the hard disk drive cover Access to the HDD modules Removing the hard disk cover Control elements and indicators Front of server Starting up and operation ID card Control elements Starting up and operation LEDs on the control panel Indicators on the drives DVD drive activity indicator Starting up and operation Hard disk drive indicators Indicators on the 3.5 inch and 2.5 inch HDD modules Rear of server Starting up and operation Starting up and operation LAN indicators LAN activity indicator management LANLAN transfer rate indicator management LAN LAN activity indicator shared LAN Indicators on the hot-plug power supply units Switching the server on and off Switching the server onSystem already installed Switching the server off Timer-controlled switch-on/off Ring indicatorAfter power failure Power button override Configuring the onboard Sata controller Configuring the serverConfiguring the SAS/SATA RAID controller Advantages of the ServerView Installation Manager LSI RAID / Scsi Controllers Configure onboard Sata controller Installing the operating system Cleaning the server Bios Setup security functions Property and data protection Property and data protection Troubleshooting and tips Power-on indicator remains unlitPower cable incorrectly connected Power supply overloaded Server switches itself off Screen remains blank No screen display or display drifts Flickering stripes on monitor screenMonitor does not support the set horizontal frequency RAID controller configuration incorrect Drives reported as dead when starting systemIncorrect date and time RAID controller is not configured for this drive Error message on screenAdded drive reported as defective Page CSS components Hot-plug power supply units optional Replacing the hot-plug power supply unitHot-plug components CSS components Hot-plug hard disk drives CSS components For description see section Hard disk drive indicators on CSS components 2.1 3.5-inch HDD module and dummy module CSS components 2.2 2.5-inch HDD module and dummy module CSS components Handling hard disk drives and HDD modules CSS components Floorstand removing the hard disk cover CSS components Removing/installing the dummy module Unlocking the 3.5-inch and 2.5-inch HDD modules CSS components Installing the HDD module Installing the 3.5-inch and 2.5-inch HDD modules CSS components Removing the HDD module Non-hot-plug components Open the server see section Opening the server on Opening the server Opening the server example floorstand model CSS components Removing system fan 2 System fan 2 and system fan 2&4 Removing system fan 1 System fan 1 and system fan 1&3 Identifying a CSS component Example Removing system fan 1&3 Replacing a memory module Installing a new memory moduleRemoving a defective memory module Replacing system fan 2 Replacing the system fanReplacing system fan 1 Replacing an expansion card Removing a defective expansion card CSS components Installing a new expansion card Installing a new expansion card Reinstalling the fans and closing the server Installing system fan 1 CSS components Installing system fan 2 Installing system fan 2 CSS components Closing the server Closing the server example floorstand model Appendix server specification Memory Modules ConfigurationProcessor Interfaces Appendix server specification Onboard or integrated controllers Drive bays PCI-SlotsOperating Panel Dimensions Base unit specific Environmental Electrical values 120 Operating Manual Bios Index Index Labels LAN activity indicator Sddc Unpacking, server USB connector